SMA SC 400HE Installation - Manual (Page 58)

External Connections SMA Solar Technology AG
58 SCxxxHE-IEN104432 Installation Guide
The sliding plate must be put back on once the copper bars have been installed.
6.2.2 Procedure for Models 13/0 and 13/4
1. Remove the Plexiglas cover and sliding plate, see 6.2.1 ”Mounting and Dismounting the
Plexiglas Cover and Sliding Plate” (page 55).
1. Mount the front sliding plate into the roof of the
Sunny Central. For this purpose, tightly fasten the
three screws on the underside.
2. Mount the three insulators to the angle section. For
this purpose, tightly fasten the three insulators to the
press-fitted threaded bolts.
3. Feed the copper bars into the AC cabinet from
above.