SMA SC 400HE Installation User Manual
Page 79
Advertising
![background image](/files/819005/content/doc079.png)
SMA Solar Technology AG
External Connections
Installation Guide
SCxxxHE-IEN104432
79
6.6.2 Connecting the DC Cable to the Low-Voltage HRC Fuses
The cables are fed through the base and floor of the DC cabinet.
1. Remove the sliding plate (A) located in the DC
cabinet.
2. Attach the sealing tape to the rear frame of the
base.
3. Pull the DC cables of the back row of fuses into the
interior of the switch cabinet and cut them to length
up to the fuse holders (A).
Dismounting the front fuse holder
The front fuse holders can be removed, thus making it easier to mount the DC cables to the
back row of fuses.
A
A
Advertising
This manual is related to the following products: