Yaskawa GPD515/G5 - Manual (Page 54)

10 Appendix 2 Parameter Cross Reference
54 YASKAWA PL.A1000.01 G5 to A1000 - Product Transition Guide
Analog Input
Gain (terminal 14)
(terminal A2 for
A1000)
H3-10 100.0 % H3-11 100.0 % ―
Bias (terminal 14)
(terminal A2 for
A1000)
H3-11 0.0 % H3-12 0.0% ―
Analog Input Filter
Time Constant
H3-12 0.03 s H3-13 0.03 s ―
Analog Input Terminal
Enable Selection
─ ─ H3-14 7
─ H3-14
─ 1: Terminal A1 enabled
─ 2: Terminal A2 enabled
─ 3: Terminals A1, A2 enabled
─ 4: Terminal A3 enabled
─ 5: Terminals A1, A3 enabled
─ 6: Terminals A2, A3 enabled
─
7: Terminals A1, A2, and A3
enabled
Multi-Function Analog
Output
Monitor Selection
(terminal 21) (terminal
FM for A1000)
H4-01 2* H4-01 102* *Refer to the “Comments” column for F4-01
Gain (terminal 21)
(terminal FM for
A1000)
H4-02 1.00 H4-02 100.0 %
Setting units differ between G5 and A1000.
Set A1000 by multiplying H4-05 in G5 by 100.
Bias (terminal 21)
(terminal FM for
A1000)
H4-03 0.0 % H4-03 0.0 % ―
Monitor Selection
(terminal 23) (terminal
FM for A1000)
H4-04 3* H4-04 103* *Refer to the “Comments” column for F4-01
Gain (terminal 23)
(terminal FM for
A1000)
H4-05 0.50 H4-05 50.0 %
Setting units differ between G5 and A1000.
Set A1000 by multiplying H4-05 in G5 by 100.
Bias (terminal 23)
(terminal FM for
A1000)
H4-06 0.0 % H4-06 0.0 % ―
Multi-Function Analog
Output Signal Level
Selection
H4-07 0
H4-07
(FM monitor)
0
H4-07
H4-07
Terminal FM
Signal Level
Selection
H4-08
Terminal AM
Signal Level
Selection
0: 0 to +10 V output 0: 0 to 10 V
H4-08
(AM monitor)
0
1: 0 to ±10 V output 1: -10 to 10 V
― 2: 4 to 20 mA
MEMOBUS
Communication
Station Address H5-01 1F H5-01 1F ―
Communication Speed
Selection
H5-02 3 H5-02 3
H5-02 H5-02
0: 1200 bps 0: 1200 bps
1: 2400 bps 1: 2400 bps
2: 4800 bps 2: 4800 bps
3: 9600 bps 3: 9600 bps
4: 19200 bps 4: 19200 bps
─ 5: 38400 bps
─ 6: 57600 bps
─ 7: 76800 bps
─ 8: 115200 bps
Communication Parity
Selection
H5-03 0 H5-03 0
H5-03 H5-03
0: No parity 0: No parity
1: Even parity 1: Even parity
2: Odd parity 2: Odd parity
MEMOBUS
Communication
Stopping Method After
Communication Error
H5-04 3 H5-04 0
H5-04 H5-04
0: Ramp to stop 0: Ramp to stop
1: Coast to stop 1: Coast to stop
2: Fast Stop 2: Fast Stop
3: Alarm Only 3: Alarm Only
Communication Error
Detection Selection
H5-05 1 H5-05 0
H5-05 H5-05
0: Disabled 0: Disabled
1: Enabled 1: Enabled
Parameter Name
G5 A1000 Comments (Gray shading indicates default settings)
No. Default No. Default G5 A1000