Yaskawa BACnet MS/TP SI-B3/V - Manual (Page 24)

Figure 14 Ground Wire Routing
12.
Attach the option to the drive. Properly seat the tabs on the left and right sides of the
option to the drive case.
Line up tabs
Line up tabs
Figure 15 Connect the Option
13.
Connect the ground wire at the option ground terminal. Tighten the screw to 0.5 to
0.6 N
•m or (4.4 to 5.3 in lbs) using an M3 Phillips screwdriver.
5 Installation Procedure
24 YASKAWA TOEP YAICOM 19A V1000 Option BACnet MS/TP SI-B3/V Installation & Technical Manual