Yaskawa Varispeed-656 DC5 - Manual (Page 61)

Appendix A CONSTANTS LIST
E-51
U1-10 Input Terminal Status
[Input Term Sts]
− Q Shows input ON/OFF status.
*1: Can be selected by H1-XX.
• Output signal level at multi-function analog output: Dis-
abled.
U1-11 Output Terminal Status
[Output Term Sts]
− Q Shows output ON/OFF status.
*2: Can be selected by H2-XX.
• Output signal level at multi-function analog output: Dis-
abled.
U1-12 Operation Status
[Drive Ope Sts]
− Q VS-656DC5 operating status
• Output signal level at multi-function analog output: Dis-
abled.
U1-13 Cumulative Operation Time
[Elapsed Time]
1 H Q • Output signal level at multi-function analog output: Dis-
abled.
U1-14 Software No.
[FLASH ID]
− B (Manufacturer's ID number)
U1-17 Input Power Factor
[Power Factor]
1% B • Output signal level at multi-function analog output
10 V: 100%
(0 to +10 V output)
U1-18 Effective Current Reference
[Real Current]
0.1% B • Output signal level at multi-function analog output
10 V: Rated current
(0 to +10 V output)
U1-19 Ineffective Current Reference
[Reactive Current]
0.1% B • Output signal level at multi-function analog output
10 V: Rated current
(0 to +10 V output)
(cont’d)
Constant No. Name
[Display]
Unit Access
Level
Remarks
= 00000000
1: RUN-SB (terminal 1) ON
1: STOP (terminal 2) ON
1: External fault (terminal 3) ON
*1
1: Fault reset (terminal 4) ON
*1
1: Not used (terminals 5 to 7) ON *1
1: External baseblock (terminal 8) ON *1
= 00000000
1: Running (terminals 9-10) ON *2
1: CREADY (terminals 25 to 27) ON
*2
1: During MCON (terminals 26-37) ON *2
1: Not used (always 0)
1: Fault output (terminals 18/19-20) ON
= 00000000
1: Running
1: Not used (always 0)
1: Reset input ON
1: Not used (always 0)
1: VS-656DC5 ready
1: Minor fault detected
1: Major fault detected