Receiving, Option package contents, Tools required for installation – Yaskawa V1000-Series Option SI-EM3D/V Dual Port EtherNet Modbus TCP/IP Technical Manual User Manual
Page 8: 3receiving
3
Receiving
Please perform the following tasks upon receipt of the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the name plate of the option package.
• Contact your supplier if you have received the wrong model or the option does not function properly.
u
Option Package Contents
Description
Option Unit
Ground Wire
Warning Labels
Installation Manual
–
MANUAL
Quantity
1
4
1
1
u
Tools Required for Installation
A Phillips screwdriver (M3, M3.5 to M6 metric or #1, #2 U.S. standard) is required to install the option. Screw sizes vary by
drive capacity. Select a screwdriver appropriate for the drive capacity.
Note:
Tools required to prepare the option cables for wiring are not listed in this manual.
3 Receiving
8
YASKAWA SIEP YAICOM 17A V1000 Option Dual-Port Modbus TCP/IP SI-EM3D/V Technical Manual