Casio XJ-UT310WN Network Function Guide - Manual (Page 19)

19
To create a user SSID
1.
Perform one of the operations below to connect a computer to the projector via
a LAN.
z “To use a projector simple connection SSID to establish a wireless LAN connection and
project” (page 12), steps 1 through 9
z “To use a projector generic SSID to establish a wireless LAN connection and project” (page
15), steps 1 through 11
z “To use a user SSID to establish a wireless LAN connection and project” (page 22), steps 1
through 11 (User SSID already created).
z “To use a LAN cable to connect a computer directly to the projector” (page 36), steps 1
through 9
2.
On the Network Connection window, click the function menu button and then
click [Admin Screen] on the menu that appears.
z This starts up the computer’s web browser and displays the projector’s top page.
3.
On the left pane, click “Projector Admin”. On the password input screen that
appears, enter the password.
z The initial default password is “admin”.
4.
Click the [Login] button.
z If login proceeds normally, the “System Status” page will appear.
Function menu button