Casio XJ-UT310WN Network Function Guide - Manual (Page 42)

42
Add-on Driver Software for Windows
With Windows, use of some parts of the Network Connection requires installation of the driver
software shown in the table below. For information about how to obtain this software, go to the CASIO
website (http://www.casio-intl.com/support/).
Outputting Computer Audio from the Projector Speaker
You can use Network Connection to output computer audio from the projector speaker while a
computer screen is being projected over a LAN connection.
z To output computer audio from the projector speaker, select [Audio Out] on the Network
Connection function menu so there is check mark next to it.
Enabling projector speaker output will disable audio output from the computer speaker(s).
z To disable projector speaker audio output and re-enable output from the computer speaker(s),
select [Audio Out] on the function menu again to remove the check mark.
Note
z The function menu [Audio Out] item is unchecked (disabled) whenever you start up Network
Connection.
To use this function: Install this driver software:
Audio output function VAC driver (for Windows XP version that does not support audio level
mixer functions)
Extended screen output function VDD driver (for Windows XP and Windows Vista)