Casio XJ-UT310WN Network Function Guide - Manual (Page 34)

34
4.
On the “Enter the login code.” dialog box that appears, enter the login code.
z In the “Login Code” box, enter the four-digit number shown in the upper left corner of the LAN
connection standby screen that is being projected.
5.
When everything is the way you want, click [OK].
z While the projector is connected to a computer over a wireless LAN, a Network Connection
window like the one shown below will be displayed on the computer screen. The computer
screen image (main screen) will be projected.
z For details about Network Connection window operations, see “Using Network Connection”
(page 39).
6.
To terminate the wireless LAN connection and discontinue computer screen
projection, click the close button (
) in the upper right corner of the Network
Connection window.
z This closes the Network Connection window and returns the projected image to the LAN
connection standby screen.
Note
z When using the above type of connection, settings can be configured to eliminate the need for
login code input. For information about how to configure settings, see “To configure Control
Panel page network settings” (page 59).