TA Triumph-Adler 206ci - Manual (Page 107)

3-43
Common Operations > Using Various Functions
Paper Output
Set paper output to document finisher or job separator tray.
1
Display the screen.
1 Referring to Using Various Functions on page 3-30, display the screen.
2 Press [Functions] and then [Paper Output].
2
Select the output destination.
Inner Tray*
* If the optional document finisher has been installed, [Inner Tray] will change to [Finisher Tray].
Places pages face down in the inner tray.
Finisher Tray* Places pages face down in the optional document finisher tray.
Job Separator Tray Places pages face down in the job separator tray.
NOTE
To change default destination, refer to Paper Output on page 9-13 for details.
Copy Print from
USB
Ready to copy. (Full Color)
Functions
Original Size
Auto
Close
10:10
Original Orientation
Top Edge on Top
Inner tray
Off
Mixed Size Originals
Paper Output
1/5
Add/Edit
Shortcut
Ready to copy. (Full Color)
Copy Copies
Paper
Selection Zoom Density
Duplex Combine Collate/
Offset
1-sided>>1-sided
Auto 100% Normal 0
Collate Off
Functions
10:10
Favorites
G
B
0001_01
G
B
0002_00
2
1
Use [ ] or [ ] to scroll up and down.
Ready to copy. (Full Color)
Paper Output
Inner tray
10:10
Cancel OK
Job Separator
Tray
G
B
0031_00