TA Triumph-Adler 206ci - Manual (Page 208)

6-48
Sending > Scanning using TWAIN
Scanning using TWAIN
This section explains how to scan an original using TWAIN.
The procedure for scanning using the TWAIN driver is explained as an example. The WIA driver is used in the same
way.
1
Display the window.
1 Activate the TWAIN compatible application software.
2 Select the machine using the application software and display the TWAIN dialog box.
2
Configure the function.
Select scanning settings in the TWAIN dialog box that opens.
The settings that appear in the TWAIN dialog box are as follows.
NOTE
For selecting the machine, see the Operation Guide or Help for each application software.
Item Detail
Basic Original Size This setting sets the size of the scan area.
Feed Method This setting specifies the feed method of the original.
Select the feed method from the list.
Original Orientation This setting specifies the orientation of the original.
Sending Size This setting specifies the image size.