TA Triumph-Adler 206ci - Manual (Page 336)

10-20
Troubleshooting > Responding to Messages
P
R
Message Checkpoints Corrective Actions Reference
Page
Paper is left. — Remove paper from the document finisher. —
Paper jam. — If a paper jam occurs, the machine will
stop and the location of the jam will be
indicated on the touch panel. Leave the
machine on and follow the instruction to
remove the jammed paper. 10-26
Preparing to print. — The machine is under the adjustment to
maintain its quality. Please wait. —
Print overrun. — Warning. Low printer memory. The job
was paused. Press [Continue] to re-start
the job. —
Message Checkpoints Corrective Actions Reference
Page
RAM disk error.* — An error has occurred on the RAM disk.
Job is canceled. Press [End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Restart the system or turn the power
OFF/ON. If the error still occurs, divide
the file into smaller files.
04: Insufficient space on the RAM disk.
Increase the RAM disk size by changing
RAM Disk Setting in System Menu.
NOTE: The range of RAM disk size
can be increased by selecting
[Printer Priority] in Main Memory.
9-23
Removable memory error.* Is writing to a removable
memory prohibited? An error occurred in the removable
memory. The job stopped. Press [End].
The possible error codes and their
descriptions are as follows.
01: Connect a removable memory that
can be written to. —
— An error occurred in the removable
memory. The job stopped. Press [End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Restart the system or turn the power
OFF/ON. If the error still occurs, the
removable memory is not compatible
with the machine. Use the removable
memory formatted by this machine. If
the removable memory cannot be
formatted, it is damaged. Connect a
compatible removable memory. 7-3