TA Triumph-Adler 206ci User Manual
Page 326
10-10
Troubleshooting > Solving Malfunctions
Paper often jams.
Is the paper loaded correctly?
Load the paper correctly.
—
Turn the orientation 180 degrees
around in which the paper is
positioned.
Is the paper of the supported type? Is it
in good condition?
Remove the paper, turn it over, and
reload it.
Is the paper curled, folded or wrinkled? Replace the paper with new paper.
Are there any loose scraps or jammed
paper in the machine?
Remove any jammed paper.
2 or more sheets are
overlaps when ejected. (multi
feed)
—
Load the paper correctly.
Printouts are wrinkled.
—
Turn the orientation 180 degrees
around in which the paper is
positioned.
Is the paper damp?
Replace the paper with new paper.
If you experience frequent problems,
turn the cassette heater switch on.
Printouts are curled.
—
Turn the orientation 180 degrees
around in which the paper is
positioned.
Is the paper damp?
Replace the paper with new paper.
If you experience frequent problems,
turn the cassette heater switch on.
Cannot print.
Is the machine plugged in?
Plug the power cord into an AC outlet.
Is the machine powered on?
Turn on the main power switch.
Are the printer cable and network
cable connected?
Connect the correct printer cable and
network cable securely.
Was the machine powered on before
the printer cable was connected?
Power on the machine after
connecting the printer cable.
Is the print job paused?
Resume printing.
Cannot print with USB
memory.
USB memory not recognized.
Is the USB host blocked?
Select [Unblock] in the USB host
settings.
—
Check that the USB memory is
securely plugged into the machine.
—
When displaying an image
sent from the machine on the
PC, an image size is shrunk
vertically or horizontally.
Have you selected 200×100dpi Normal
or 200×400dpi Super for the scan
resolution?
Select a scan resolution other than
200×100dpi Normal or 200×400dpi
Super when sending an image.
Symptom
Checkpoints
Corrective Actions
Reference
Page