TA Triumph-Adler 206ci - Manual (Page 331)

10-15
Troubleshooting > Responding to Messages
C
Message Checkpoints Corrective Actions Reference
Page
Calibrating… — The machine is under the adjustment to
maintain its quality. Please wait. —
Cannot connect to Authentication
Server.* — Set machine time to match the server’s
time. 9-24
— Check the domain name. 9-34
— Check the host name. 9-34
— Check the connection status with the
server. —
Cannot duplex print on the
following paper.* Did you select a paper size/
media type that cannot be duplex
printed? Press [Paper Selection] to select the
available paper.
Press [Continue] to print without using
Duplex function. 4-8
Cannot offset the following
paper.* Did you select a paper size/
media type that cannot be offset? Press [Paper Selection] to select the
available paper.
Press [Continue] to print without using
Offset function. 3-44
Cannot print the specified
number of copies.* – Only one copy is available. Press
[Continue] to continue printing. Press
[Cancel] to cancel the job.
The machine may reproduce the same
originals by arranging the following
settings:
- Uncheck [RAM Disk] in the [Device
Settings] tab of the printer's properties.
NOTE: If you unchecked the [RAM
Disk], check the [RAM Disk] again
after the printing is completed. If
not, print speed may be reduced.
—
Do you want to print the data
stored in the USB memory? Only one copy is available. Press
[Continue] to continue printing. Press
[Cancel] to cancel the job.
The machine may reproduce the same
originals by arranging the following
settings:
- Reduce the number of copies to be
printed at once.
Furthermore, the machine may
reproduce the same originals by
arranging the following settings:
- Select [Copy Priority] of Main Memory
in System Menu.
NOTE: Before changing the Main
Memory setting, contact your
administrator.
9-24
Cannot process this job.* — This job is canceled because it is
restricted by User Authorization or Job
Accounting. Press [End]. —