PLANET SGS-5220-24P2X - Manual (Page 102)

User’s Manual of SGS-5220 Series
102
settings relate to the currently selected stack unit, as reflected by the Page header. The LACP Configuration screen in Figure
4-5-4 appears.
Figure 4-5-4 : LACP Port Configuration Page Screenshot
The Page includes the following fields:
Object Description

Port The switch port number.

LACP Enabled Controls whether LACP is enabled on this switch port. LACP will form an
aggregation when 2 or more ports are connected to the same partner. LACP can
form max 12 LAGs per switch and 2G LAGs per stack.

Key The Key value incurred by the port, range 1-65535 . The Auto setting will set the
key as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3.
Using the Specific setting, a user-defined value can be entered. Ports with the
same Key value can participate in the same aggregation group, while ports with
different keys cannot.
The default setting is “Auto”

Role
The Role shows the LACP activity status. The Active will transmit LACP packets
each second, while Passive will wait for a LACP packet from a partner (speak if
spoken to).
 Timeout The Timeout controls the period between BPDU transmissions. Fast will transmit
LACP packets each second, while Slow will wait for 30 seconds before sending a
LACP packet.

Priority The Prio controls the priority of the port. If the LACP partner wants to form a
larger group than is supported by this device then this parameter will control