PLANET SGS-5220-24P2X User Manual
Page 26
User’s Manual of SGS-5220 Series
SGS-5220-24P2X LED Indication
Figure 2-1-4:
Front Panel LEDs of SGS-5220-24P2X
SGS-5220-24P2X LED Indication Table
LED definition
System / Alert / Stack
LED
Color
Function
PWR
Green
Lights
to indicate that the Switch is powered on.
Blinks
to indicate the System is running under booting procedure.
Master
Green
Lights
to indicate that the Switch is the Master of the stack group.
FAN1
Green
Lights
to indicate fan1 has failed.
FAN2
Green
Lights
to indicate fan2 has failed.
PWR1
Green
Lights
to indicate power supply 1 has failed.
PWR2
Green
Lights
to indicate power supply 2 has failed.
STX1
Green
Lights
to indicate the link through that SFP+ stacking port is successfully established with
speed 10Gbps.
Off
to indicate that the port is link down.
STX2
Green
Lights
to indicate the link through that SFP+ stacking port is successfully established with
speed 10Gbps.
Off
to indicate that the port is link down.
Per 10/100/1000Base-T interfaces (Port-1 to Port-24)
LED
Color
Function
LNK/ACT
Green
Lights
to indicate the link through that port is successfully established at
10/100/1000Mbps.
Blinks
to indicate that the switch is actively sending or receiving data over that port.
PoE
Orange
Lights
to Indicate the port is providing 56V DC in-line power.
Blinks
to indicate the connected device is not a PoE Powered Device (PD).
Per 10G uplink SFP+ interface (Port-25 to Port-26)
LED
Color
Function
10G
LNK/ACT
Green
Lights
to indicate the port is running in 10Gbps speed and successfully established.
Blinks
to indicate that the switch is actively sending or receiving data over that port.
1G
LNK/ACT
Orange
Lights
to indicate the port is running in 1Gbps speed and successfully established.
Blinks
to indicate that the switch is actively sending or receiving data over that port.
26