7 port security detail – PLANET SGS-5220-24P2X User Manual

Page 273

Advertising
background image

User’s Manual of SGS-5220 Series

4.12.7 Port Security Detail

This Page shows the MAC addresses secured by the Port Security module. Port Security is a module with no direct

configuration. Configuration comes indirectly from other modules - the user modules. When a user module has enabled port

security on a port, the port is set-up for software-based learning. In this mode, frames from unknown MAC addresses are

passed on to the port security module, which in turn asks all user modules whether to allow this new MAC address to forward or

block it. For a MAC address to be set in the forwarding state, all enabled user modules must unanimously agree on allowing the

MAC address to forward. If only one chooses to block it, it will be blocked until that user module decides otherwise. The Port

Security Detail screen in

Figure 4-12-7

appears.

Figure 4-12-7:

Port Security Detail Screen Page Screenshot

The Page includes the following fields:

Object

Description

MAC Address & VLAN

ID

The MAC address and VLAN ID that is seen on this port. If no MAC addresses

are learned, a single row stating "No MAC addresses attached" is displayed.

Indicates whether the corresponding MAC address is blocked or forwarding. In

the blocked state, it will not be allowed to transmit or receive traffic.

State

Shows the date and time when this MAC address was first seen on the port.

Time of Addition

If at least one user module has decided to block this MAC address, it will

stay in the blocked state until the hold time (measured in seconds) expires.

Age/Hold

If all user modules have decided to allow this MAC address to forward, and

aging is enabled, the Port Security module will periodically check that this

MAC address still forwards traffic.

If the age period (measured in seconds) expires and no frames have been

seen, the MAC address will be removed from the MAC table. Otherwise a

new age period will begin.

If aging is disabled or a user module has decided to hold the MAC address

indefinitely, a dash (-) will be shown.

273

Advertising
This manual is related to the following products: