4 dynamic ip source guard table – PLANET SGS-5220-24P2X User Manual

Page 286

Advertising
background image

User’s Manual of SGS-5220 Series

status for this particular port.

The VLAN ID of the entry.

VLAN ID

The MAC address of the entry.

MAC Address

The IP address of the entry.

IP Address

Buttons

Auto-refresh

: Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.

: Refreshes the displayed table starting from the "Start from MAC address" and "VLAN" input fields.

: Flushes all dynamic entries.

:

Updates the table starting from the first entry in the MAC Table, i.e. the entry with the lowest VLAN ID and MAC

address.

: Updates the table, starting with the entry after the last entry currently displayed.

4.13.4 Dynamic IP Source Guard Table

Entries in the Dynamic IP Source Guard Table are shown on this Page. The Dynamic IP Source Guard Table is sorted first by

port, then by VLAN ID, then by IP address, and then by IP mask. The Dynamic IP Source Guard Table screen in

Figure 4-13-4

appears.

Figure 4-13-4:

Dynamic IP Source Guard Table Screenshot

Navigating the ARP Inspection Table

Each Page shows up to 99 entries from the Dynamic IP Source Guard table, default being 20, selected through the "entries per

Page

" input field. When first visited, the web Page will show the first 20 entries from the beginning of the Dynamic IP Source

Guard Table.

The "Start from port address", "VLAN", "IP address" and "IP mask" input fields allow the user to select the starting point in the

Dynamic IP Source Guard Table. Clicking the “Refresh” button will update the displayed table starting from that or the closest

286

Advertising
This manual is related to the following products: