PLANET SGS-5220-24P2X - Manual (Page 204)

User’s Manual of SGS-5220 Series
frames.
■ ARP : The ACE will match ARP/RARP frames.
■ IPv4 : The ACE will match all IPv4 frames.
■ IPv4/ICMP : The ACE will match IPv4 frames with ICMP protocol.
■ IPv4/UDP : The ACE will match IPv4 frames with UDP protocol.
■ IPv4/TCP : The ACE will match IPv4 frames with TCP protocol.
■ IPv4/Other : The ACE will match IPv4 frames, which are not
ICMP/UDP/TCP.
■ IPv6 : The ACE will match all IPv6 standard frames.
 Action Indicates the forwarding action of the ACE.
■ Permit : Frames matching the ACE may be forwarded and learned.
■ Deny : Frames matching the ACE are dropped.
 Rate Limiter Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When
Disabled is displayed, the rate limiter operation is disabled.
Indicates the port redirect operation of the ACE. Frames matching the ACE are
redirected to the port number.
 Port Redirect
The allowed values are Disabled or a specific port number. When Disabled is
displayed, the port redirect operation is disabled.
 Mirror Specify the mirror operation of this port. The allowed values are:
■ Enabled : Frames received on the port are mirrored.
■ Disabled : Frames received on the port are not mirrored.
The default value is "Disabled".
 CPU Forward packet that matched the specific ACE to CPU.
Forward first packet that matched the specific ACE to CPU.  CPU Once
The counter indicates the number of times the ACE was hit by a frame.  Counter
Indicates the hardware status of the specific ACE. The specific ACE is not
applied to the hardware due to hardware limitations.
 Conflict
Buttons
Auto-refresh : Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the Page.
204