PLANET SGS-5220-24P2X - Manual (Page 325)

User’s Manual of SGS-5220 Series
The interval between each loop protection PDU sent on each port. valid values
are 1 to 10 seconds.
 Transmission Time
The period (in seconds) for which a port will be kept disabled in the event of a
loop is detected (and the port action shuts down the port). Valid values are 0 to
604800 seconds (7 days). A value of zero will keep a port disabled (until next
device restart).

Shutdown Time
Port Configuration
Object Description
The switch port number of the port. 
Port
Controls whether loop protection is enabled on this switch port.  Enable
Configures the action performed when a loop is detected on a port. Valid values
are Shutdown Port, Shutdown Port and Log or Log Only.
 Action
Controls whether the port is actively generating loop protection PDU's, or
whether it is just passively looking for looped PDU's.

Tx Mode
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.17.2 Loop Protection Status
This Page displays the loop protection port status of the switch; screen in Figure 4-17-2 appears.
Figure 4-17-2: Loop Protection Status Screenshot
The Page includes the following fields:
Object Description
 Port The Managed Switch port number of the logical port.
325