PLANET SGS-5220-24P2X - Manual (Page 75)

User’s Manual of SGS-5220 Series
Figure 4-2-28: Software Image Selection Page Screenshot
The Page includes the following fields:
Object Description
 Image The flash index name of the firmware image. The name of primary (preferred)
image is image, the alternate image is named image.bk.
 Version The version of the firmware image.
 Date The date where the firmware was produced.
Buttons
: Click to use the alternate image. This button may be disabled depending on system state.
4.2.24 Factory Default
You can reset the configuration of the Managed Switch on this Page. Only the IP configuration is retained. The new
configuration is available immediately, which means that no restart is necessary. The Factory Default screen in Figure 4-2-29
appears.
Figure 4-2-29: Factory Default Page Screenshot
75