PLANET SGS-5220-24P2X - Manual (Page 185)

User’s Manual of SGS-5220 Series
The Page includes the following fields:
Object Description
The logical port for the settings contained in the same row.
Click on the port number in order to configure tag remarking.
For more detail, please refer to chapter 4.9.6.1.
 Port
Shows the tag remarking mode for this port.
■ Classified : Use classified PCP/DEI values
■ Default : Use default PCP/DEI values.
■ Mapped : Use mapped versions of QoS class and DP level.

Mode
4.9.6.1 QoS Egress Port Tag Remarking
The QoS Egress Port Tag Remarking for a specific port are configured on this Page. The QoS Egress Port Tag Remarking
sscreen in Figure 4-9-7 appears.
Figure 4-9-7: QoS Egress Port Tag Remarking Page Screenshot
The Page includes the following fields:
Object Description
Controls the tag remarking mode for this port.
■ Classified : Use classified PCP/DEI values.
■ Default : Use default PCP/DEI values.
■ Mapped : Use mapped versions of QoS class and DP level.
 Mode
 PCP/DEI Configuration Controls the default PCP and DEI values used when the mode is set to Default.

(QoS class, DP level)
to (PCP, DEI) Mapping
Controls the mapping of the classified (QoS class, DP level) to (PCP, DEI) values
when the mode is set to Mapped.
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
185