PLANET WGSD-8020 - Manual (Page 250)

User’s Manual of WGSD-8020
250
Set or show the IP setup.
Syntax:
IP Setup [<ip_addr>] [<ip_mask>] [<ip_router>] [<vid>]
Parameters:
<ip_addr> : IP address (a.b.c.d), default: Show IP address
<ip_mask> : IP subnet mask (a.b.c.d), default: Show IP mask
<ip_router> : IP router (a.b.c.d), default: Show IP router
<vid> : VLAN ID (1-4095), default: Show VLAN ID
Default Setting:
IP Address : 192.168.0.100
IP Mask : 255.255.255.0
IP Router : 192.168.0.1
VLAN ID : 1
Example:
Set IP address:
SWITCH/>ip setup 192.168.0.100 255.255.255.0
IP Ping
Description:
Ping IP address (ICMP echo).
Syntax:
IP Ping <ip_addr> [<ping_length>]
Parameters:
<ip_addr> : IP host address (a.b.c.d)
<ping_length> : Ping data length (8-1400), excluding MAC, IP and ICMP headers
Example:
SWITCH/>ip ping 192.168.0.51
PING server 192.168.0.51
60 bytes from 192.168.0.51: icmp_seq=0, time=0ms
60 bytes from 192.168.0.51: icmp_seq=1, time=0ms
60 bytes from 192.168.0.51: icmp_seq=2, time=10ms
60 bytes from 192.168.0.51: icmp_seq=3, time=0ms
60 bytes from 192.168.0.51: icmp_seq=4, time=0ms
Sent 5 packets, received 5 OK, 0 bad