PLANET WGSD-8020 - Manual (Page 287)

User’s Manual of WGSD-8020
287
6.6 VLAN Configuration Command
VLAN Configuration
Description:
Show VLAN configuration.
Syntax:
VLAN Configuration [<port_list>]
Parameters:
<port_list> : Port list or 'all', default: All ports
Example:
Show VLAN status of port1
SWITCH/>vlan configuration 1
Mode : IEEE 802.1Q
Port PVID IngrFilter FrameType LinkType Q-in-Q Mode Eth type
------------- ---------- --------------- ------------ ------------------ --------
1 1 Disabled All UnTag Disable N/A
VID Ports
---- -----
1 1-26
VLAN Mode
Description:
Set or show the VLAN Mode.
Syntax:
VLAN Mode [portbased|dot1q]
Parameters:
portbased : Port-Based VLAN Mode
dot1q : 802.1Q VLAN Mode
(default: Show VLAN mode)
Default Setting:
IEEE 802.1Q
Example:
Set VLAN mode in port base
SWITCH/>vlan mode portbased