PLANET WGSD-8020 - Manual (Page 335)

User’s Manual of WGSD-8020
335
6.13 LLDP Command
LLDP Configuration
Description:
Show LLDP configuration.
Syntax:
LLDP Configuration [<port_list>]
Parameters:
<port_list> : Port list or 'all', default: All ports
LLDP Mode
Description:
Set or show LLDP mode.
Syntax:
LLDP Mode [<port_list>] [enable|disable|rx|tx]
Parameters:
<port_list> : Port list or 'all', default: All ports
enable : Enable LLDP reception and transmission
disable : Disable LLDP
rx : Enable LLDP reception only
tx : Enable LLDP transmission only
(default: Show LLDP mode)
Default Setting:
Disable
Example:
Enable port1 LLDP function.
SWITCH/>lldp mode 1 enable
LLDP Optional TLV
Description:
Set or show LLDP Optional TLVs.
Syntax:
LLDP Optional_TLV [<port_list>] [port_descr|sys_name|sys_descr|sys_capa|mgmt_addr] [enable|disable]
Parameters:
<port_list> : Port list or 'all', default: All ports