PLANET WGSD-8020 - Manual (Page 281)

User’s Manual of WGSD-8020
281
6.5 Link Aggregation Command
Link Aggregation Configuration
Description:
Show link aggregation configuration.
Syntax:
Aggr LACP Configuration [<port_list>]
Parameters:
<port_list> : Port list or 'all', default: All ports
Example:
SWITCH/>aggr lacp configuration
Port Mode Key Role
---- -------- ---- ------
1 Disabled Auto Active
2 Disabled Auto Active
3 Disabled Auto Active
4 Disabled Auto Active
5 Disabled Auto Active
6 Disabled Auto Active
7 Disabled Auto Active
8 Disabled Auto Active
Link Aggregation Mode
Description:
Set or show LACP mode.
Syntax:
Aggr LACP Mode [<port_list>] [enable|disable]
Parameters:
<port_list> : Port list or 'all', default: All ports
enable : Enable LACP protocol
disable : Disable LACP protocol
(default: Show LACP mode)
Default Setting:
disable
Example:
Set LACP mode