Qos weight, Qos rate limiter – PLANET WGSD-8020 User Manual
Page 317
User’s Manual of WGSD-8020
317
Syntax:
QoS Mode [<port_list>] [strict|weighted]
Parameters:
<port_list>
: Port list or 'all', default: All ports
strict
: Strict mode
weighted
: Weighted mode
(default: Show QoS mode)
Default Setting:
Strict
Example:
Set weighted mode for port10
SWITCH/>qos mode 10 weighted
QoS Weight
Description:
Set or show the port egress scheduler weight.
Syntax:
QoS Weight [<port_list>] [<class>] [<weight>]
Parameters:
<port_list>
: Port list or 'all', default: All ports
<class>
: Traffic class low/normal/medium/high or 1/2/3/4
<weight>
: Traffic class weight 1/2/4/8
QoS Rate Limiter
Description:
Set or show the port rate limiter.
Syntax:
QoS Rate Limiter [<port_list>] [enable|disable] [<bit_rate>]
Parameters:
<port_list>
: Port list or 'all', default: All ports
enable
: Enable rate limiter
disable
: Disable rate limiter
(default: Show rate limiter mode)
<bit_rate>
: Rate in 1000 bits per second (500-1000000 kbps)
Default Setting:
Disabled, 500kbps