PLANET WGSD-8020 - Manual (Page 298)

User’s Manual of WGSD-8020
298
STP BPDU Guard
Description:
Set or show edge port BPDU Guard.
Syntax:
STP bpduGuard [enable|disable]
Parameters:
enable|disable : enable or disable BPDU Guard for Edge ports
Default Setting:
disable
Example:
Set edge port BPDU guard
SWITCH/>stp bpduguard enable
STP Recovery
Description:
Set or show edge port error recovery timeout.
Syntax:
STP recovery [<timeout>]
Parameters:
<timeout> : Time before error-disabled ports are reenabled (30-86400 seconds, 0 disables)
(default: Show recovery timeout)
Default Setting:
disable
Example:
Set STP recovery value in 30 sec.
SWITCH/>stp recovery 30
MSTP Configuration
STP CName
Description:
Set or Show MSTP configuration name and revision.
Syntax:
STP CName [<config-name>] [<integer>]
Parameters: