Lldp interval, Lldp hold – PLANET WGSD-8020 User Manual
Page 336
User’s Manual of WGSD-8020
336
port_descr
: Description of the port
sysm_name
: System name
sys_descr
: Description of the system
sys_capa
: System capabilities
mgmt_addr
: Master's IP address
(default: Show optional TLV's configuration)
enable
: Enables TLV
disable
: Disable TLV
(default: Show optional TLV's configuration)
Default Setting:
Description of the port: Enable
System name: Enable
Description of the system: Enable
System capabilities: Enable
Master's IP address: Enable
Example:
Disable description of the port for port1
SWITCH/>lldp optional_tlv 1 port_descr disable
LLDP Interval
Description:
Set or show LLDP Tx interval.
Syntax:
LLDP Interval [<interval>]
Parameters:
<interval>
: LLDP transmission interval (5-32768)
Default Setting:
30
Example:
Set transmission interval in 10
SWITCH/>lldp interval 10
LLDP Hold
Description:
Set or show LLDP Tx hold value.