PLANET WGSD-8020 - Manual (Page 322)

User’s Manual of WGSD-8020
322
SWITCH/>dot1x mode enable
Dot1x State
Description:
Set or show the 802.1X port state.
Syntax:
Dot1x State [<port_list>] [macbased|auto|authorized|unauthorized]
Parameters:
<port_list> : Port list or 'all', default: All ports
macbased : Switch performs 802.1X authentication on behalf of the client
auto : Port access requires 802.1X authentication
authorized : Port access is allowed
unauthorized : Port access is not allowed
(default: Show 802.1X state)
Default Setting:
Authorized
Example:
Change IEEE802.1x mode in auto for port1.
SWITCH/>dot1x state 1 auto
Dot1x Authenticate
Description:
Refresh (restart) 802.1X authentication process.
Syntax:
Dot1x Authenticate [<port_list>] [now]
Parameters:
<port_list> : Port list or 'all', default: All ports
now : Force reauthentication immediately
Dot1x Re-authentication
Description:
Set or show Reauthentication mode.
Syntax: