PLANET ICS-102 - Manual (Page 19)

User’s Manual of ICS-10x
-14-
Figure 2-12 ICS-105A stand alone installation
Please refers to APPENDIX-A for detailed wiring information of the ICS-10x.
To prevent from optic acceptor malfunction, check the both wires / transmitter before power on the
converter.
2.2.2 Chassis Installation and Rack Mounting
To install the Media Converter in a 10-inch or 19-inch with standard rack, follow the instructions described below.
Step 1 : Place your ICS-10x on a hard flat surface, with the front panel positioned towards your front side.
Step 2 : Carefully slide in the module until it is fully and firmly fitted into the slot of the chassis.
Figure 2-13 Insert a Media Converter into an available slot