PLANET ICS-102 - Manual (Page 39)

User’s Manual of ICS-10x
-34-
The page includes the following fields:
 Local UDP Port Enter the local port number
 Remote Address Enter the IP address of the remote device.
 Remote Port Enter the remote port number of the remote device.
4.4.4 Virtual COM Mode
When the ICS-10x be configured to Virtual COM mode, it allows Serial device that connected to serial port of ICS-10x to
establish TCP communication over Intranet or Internet network between Remote Host (Computer). The Virtual COM Port
driver has to be installed at the Remote Host. Users can send data by Virtual COM port, and Virtual COM port will transfer
data to Ethernet by windows socket. The Virtual COM driver maps IP Address / Port of ICS-10x to a local COM port on the
Remote Host (Computer). Once the Virtual COM connection is established, the applications work as the serial device is
direct connected to the Remote Host’s real COM port. After the connection is established, data can be transmitted in both
directions.
With connect to ICS-10x Serial over Fast Ethernet Converter, the serial devices are not limited to physical connection to
the PC/Remote Host COM port and able to be extension over longer distance. The parameter defines the maintenance
status for the Virtual COM
.
Figure 4-25 Virtual COM mode
operation mode, the user should be changed the Serial Port Configuration. The screen in Figure 4-26
appears.
When the changed