PLANET ICS-102 - Manual (Page 20)

User’s Manual of ICS-10x
-15-
Step 3 : Attach a rack-mount bracket to each side of the Chassis with supplied screws attached to the package.
Step 4 : After the brackets are attached to the chassis, use suitable screws to securely attach the brackets to the rack, as
shown in Figure 2-14.
Step 5 : Precede with the steps 4 and steps 5 of session 2.2.1 Stand-alone Installation to connect the network cabling
and supply power to your converter.
You must use the screws supplied with the mounting brackets. Damage caused to the parts by using
incorrect screws would invalidate your warranty.
Figure 2-14 Mounting the Chassis in a Rack