PLANET ICS-102 - Manual (Page 60)

User’s Manual of ICS-10x
-55-
The page includes the following fields:
SMTP Setup
 Enable SMTP To Enable SMTP function. The default value is “Disable”.
 SMTP Port Set port number of SMTP service. The default number is “25”.
 SMTP Server Address Type the SMTP server name or the IP address of the SMTP server address .
Enable If authentication is required when an e-mail is sent
Username Enter your login name for the SMTP Server.
 SMTP Login Information
Password Enter your password for the SMTP Server.
 Mail to Enter the receiver’s e-mail address.
 Mail from Enter the sender’s e-mail address. This address is used for reply e-mails.
Log-Fail Warning
 Subject
Enter the subject/title of the e-mail.
The default subject is
“[ICS-10x]Login Fail Warming” .
 Message Body
Enter the message of the e-mail.
The default subject is
“ICS-10x web Login Fail.” .
OP Change Warning
 Subject
Enter the subject/title of the e-mail.
The default subject is
“[ICS-10x]Operation Mode Change Warming” .
 Message Body
Enter the message of the e-mail.
The default subject is
“ICS-10x Operation Mode Change.” .
Reboot Warning
 Subject
Enter the subject/title of the e-mail.
The default subject is
“[ICS-10x]Device Reboot Warming” .
 Message Body
Enter the message of the e-mail.
The default subject is
“ICS-10x Device Reboot.” .
■
Logout
Press this function; the web interface will go back to login screen. The screens in Figure 4-54 and Figure 4-55 appear.
Figure 4-54 Logout dialogues screen