PLANET ICS-102 - Manual (Page 57)

User’s Manual of ICS-10x
-52-
4.5 Serial Port Configuration
he screen in Figure 4-52 appears. The page shows the converter’s serial Port configuration. T
Figure 4-52 Serial Port Configuration page screen
The page includes the following fields:
From the drop-down menu, select the serial port mode:  Mode
 RS-232
 RS-422
 RS-485
 Baudrate serial device, such as a modem, must agree on a speed or The unit and attached
baud rate to use for the serial connection, Valid baud rates.
It’s in the range of 300bps to 921600bps.
 Character Bits tted data package. The allowed value
is 5,6,7,8
Indicates the number of the bits in a transmi
The default is “8”.
 Parity Type y type. The default value is “none”. Checks for the parit
 Stop Bit The stop bit follows the data and parity bits in serial communication. It indicates
the end of transmission. The default is “1”.
 Hardware Flow Control vices in a network to ensure it is
processed efficiently. Too much data arriving before a device is prepared to
Flow control manages data flow between de
manage it causes lost or retransmitted data. The default value is “none”.