PLANET ICS-102 - Manual (Page 40)

User’s Manual of ICS-10x
-35-
Figure 4-26 Virtual COM Configuration screen
fields:
 TCP Port Number
x uses to listen to connections and that other device
must use to contact ICS-10x. To avoid conflicts with well known TCP ports, the
The page includes the following
The TCP port that ICS-10
default is set to “1024”.
 Inactive Timeout
inactive timeout. The unit drops the connection if
there is no activity on the serial line before the set time expires. To disable the
inactive timeout enter “0”.
Use the parameter to set an
Example: Use PLANET VCOM Utility + Microsoft Windows Hyper terminal COM Port
mode
Figure 4-27 Virtual COM mode
The user want to use the virtual COM like to use the serial cable connect the switch.
Use PLANET VCOM Utility to create virtual COM Port
. Hyper Terminal set up a new connection with the virtual COM port
1. Setup Operation Mode and Serial Port of ICS-10x
2.
3