Appendix b: troubleshooting – PLANET WDAP-C7200AC User Manual

Page 125

Advertising
background image

User Manual of WDAP-C7200AC

-116-

Appendix B: Troubleshooting

If you find the AP is working improperly or stop responding to you, please read this troubleshooting first before

contacting the dealer for help. Some problems can be solved by yourself within a very short time.

Scenario

Solution

The AP is not responding to

me when I want to access it

by Web browser.

a. Please check the connection of the power cord and the

Ethernet cable of this AP. All cords and cables should be
correctly and firmly inserted to the AP.

b. If all LED on this AP is off, please check the status of

power adapter, and make sure it is correctly powered.

c. You must use the same IP address section which AP

uses.

d. Are you using MAC or IP address filter? Try to connect

the AP by another computer and see if it works; if not,
please reset the AP to the factory default settings
(pressing ‘reset’ button for over 7 seconds).

e. Use the Smart Discovery Tool to see if you can find the

AP or not.

f. If you did a firmware upgrade and this happens, contact

your dealer of purchase for help.

g. If all the solutions above don’t work, contact the dealer

for help.

I can’t get connected to the

Internet.

a. Go to ‘Status’ -> ‘Internet Connection’ menu on the router

connected to the AP, and check Internet connection
status.

b. Please be patient, sometimes Internet is just that slow.
c. If you’ve connected a computer to Internet directly

before, try to do that again, and check if you can get
connected to Internet with your computer directly
attached to the device provided by your Internet service
provider.

d. Check PPPoE / L2TP / PPTP user ID and password

entered in the router’s settings again.

e. Call your Internet service provider and check if there’s

something wrong with their service.

f. If you just can’t connect to one or more website, but you

can still use other internet services, please check
URL/Keyword filter.

g. Try to reset the AP and try again later.
h. Reset the device provided by your Internet service

provider too.

Advertising