PLANET WDAP-C7200AC - Manual (Page 15)

User Manual of WDAP-C7200AC
-6-
1.3 Product Features
 Standard Compliant Hardware Interface
 Complies with IEEE 802.11ac (draft 2.0) and IEEE 802.11a/b/g/n standards
 1 x 10/100/1000Base-TX Port with 1-port PoE (PD, Powered Device)
 IEEE 802.3at Power over Ethernet design
 RF Interface Characteristics
 Features 2.4GHz (802.11b/g/n) and 5GHz (802.11a/n/ac) concurrent dual band for more efficiency
of carrying high load traffic
 2T2R MIMO technology for enhanced throughput and coverage
 Provides multiple adjustable transmit power control
 High speed up to 1.2Gbps (300Mbps for 2.4GHz + 867Mbps for 5GHz) wireless data rate
 Comprehensive Wireless Advanced Features
 Multiple Wireless Modes: AP, Client, WDS PtP/ PtMP, WDS Repeater, Universal Repeater
 Supports up to 10 multiple-SSIDs (2.4GHz+5GHz) to allow users to access different networks
through a single AP
 Supports VLAN function to limit the clients to access the specific internal network resource
 Supports WMM (Wi-Fi Multimedia) and wireless QoS to enhance the efficiency of multimedia
application
 Supports IAPP (Inter Access Point Protocol) and wireless roaming to enable clients to roam across
different wireless networks
 Supports 5-level Transmitting Power Control to adapt various environments
 Supports wireless schedule to automatically enable or disable the wireless function based on
predefined schedule
 Secure Network Connection
 Advanced security: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK (TKIP/AES encryption)
and 802.1x Radius Authentication
 Supports MAC address filtering
 Easy Installation & Management
 Flexible deployment with standard 802.3at PoE/ PD supported
 Web-based UI and Quick Setup Wizard for easy configuration
 Remote Management allows configuration from a remote site
 SNMP-based management interface
 System status monitoring includes DHCP Client and System Log