PLANET WDAP-C7200AC - Manual (Page 54)

User Manual of WDAP-C7200AC
-45-
The page includes the following fields:
Object Description
Disable Wireless LAN
Interface Check the box to disable the wireless function.
Country Select your region from the pull-down list.
This field specifies the region where the wireless function of the Router
can be used. It may be illegal to use the wireless function of the Router
in a region other than one of those specified in this field. If your country
or region is not listed, please contact your local government agency for
assistance.
Band Select the desired mode. Default is “5GHz (A+N+AC)”. It is strongly
recommended that you set the band to “5GHz (A+N+AC)”, and all of
802.11a, 802.11n, and 802.11ac wireless stations can connect to the
WDAP-C7200AC.
 5 GHz (A): 802.11a mode, rate is up to 54Mbps
 5 GHz (N): 802.11n mode, rate is up to 300Mbps
 5 GHz (AC): 802.11n mode, rate is up to 867Mbps(2T2R)
 5 GHz (A+N): 802.11a/n mode, rate is up to 300Mbps
 5 GHz (N+AC): 802.11n/ac mode, rate is up to 300Mbps or
867Mbps
 5 GHz (A+N+AC): 802.11a/n/ac mode, rate is up to 54Mbps,
300Mbps, or 867Mbps
Mode There are four kinds of wireless mode selections:
 AP
 Client
 WDS
 AP+WDS
If you select WDS or AP+WDS, please click “WDS Settings” submenu
for the related configuration. Furthermore, click the “Multiple AP”
button to enable multiple SSID functions.
SSID The ID of the wireless network. User can access the wireless network
via its ID only. However, if you switch to Client Mode, this field
becomes the SSID of the AP you want to connect with.
Default: Planet AP 5G
Channel Width You can select 20MHz, 40MHz or 80MHz.
Control Sideband You can select Upper or Lower.
Channel Number You can select the operating frequency of wireless network.
Broadcast SSID If you enable “Broadcast SSID”, every wireless station located within
the coverage of the WDAP-C7200AC can discover its signal easily. If
you are building a public wireless network, enabling this feature is