PLANET WDAP-C7200AC - Manual (Page 47)

User Manual of WDAP-C7200AC
-38-
 5 GHz (A+N): 802.11a/n mode, rate is up to 300Mbps
 5 GHz (N+AC): 802.11n/ac mode, rate is up to 300Mbps or
867Mbps
 5 GHz (A+N+AC): 802.11a/n/ac mode, rate is up to 54Mbps,
300Mbps, or 867Mbps
Mode There are four kinds of wireless mode selections:
 AP
 Client
 WDS
 AP+WDS
If you select WDS or AP+WDS, please click “WDS Settings” submenu
for the related configuration. Furthermore, click the “Multiple AP”
button to enable multiple SSID function.
Network Type In Infrastructure, the wireless LAN serves as a wireless station. And
the user can use the PC equipped with the WDAP-C7200AC to access
the wireless network via other access points. In Ad hoc, the wireless
LAN will use the Ad-hoc mode to operate.
Default is “Infrastructure”.
Note: Only while the wireless mode is set to “Client”, then the
Network Type can be configured.
SSID The ID of the wireless network. User can access the wireless network
via its ID. However, if you switch to Client mode, this field becomes the
SSID of the AP you want to connect with.
Default: Planet AP 5G
Broadcast SSID If you enable “Broadcast SSID”, every wireless station located within
the coverage of the WDAP-C7200AC can discover its signal easily. If
you are building a public wireless network, enabling this feature is
recommended. In private network, disabling “Broadcast SSID” can
provide better wireless network security.
Default is “Enabled”.
Data Rate Set the wireless data transfer rate to a certain value. Since most of
wireless devices will negotiate with each other and pick a proper data
transfer rate automatically, it’s not necessary to change this value
unless you know what will happen after modification.
Default is “Auto”.
Enable Mac Clone
(Single Ethernet Client) Enable Mac Clone.
 Example of how to configure Client Mode. Please take the following steps: