Igure, Wdap-c7200ac, Nstallation – PLANET WDAP-C7200AC User Manual
Page 22: Iagram
Advertising
User Manual of WDAP-C7200AC
-13-
screws.
※
IEEE 802.3at PoE switch is required.
Figure 3-2 WDAP-C7200AC Installation Diagram 2
Step 3. Plug the RJ-45 Ethernet cable into the PoE port of the WDAP-C7200AC.
Figure 3-3 WDAP-C7200AC Installation Diagram 3
Step 4. Load the device into the mounting bracket, and be sure the device is mated with two fixed screws.
Then, rotate the device clockwise to lock it in position.
Advertising