PLANET WDAP-C7200AC - Manual (Page 91)

User Manual of WDAP-C7200AC
-82-
5.4.5 Access Control
Choose menu “WLAN2 (2.4GHz)  Access Control” to allow or deny the computer of specified MAC address
to connect with the WDAP-C7200AC on this page. After the configuration, please click the “Apply Changes”
button to save the settings.
Figure 5-67 Wireless Access Control – 2.4GHz
The page includes the following fields:
Object Description
Wireless Access
Control Mode
You can choose to set the Allowed-List, Denied-List, or disable this function.
MAC Address Enter the MAC address you want to allow or deny connection to the
WDAP-C7200AC in the field.
Comment You can make some comment on each MAC address on the list.
Current Access Control
List
You can select some MAC addresses and click the “Delete Selected” button to
delete it.
 Wireless Access Control example:
To deny a PC at the MAC address of 00:30:4F:00:00:01 to connect to your wireless network, do as follows:
Step 1. Select “Deny” from MAC Address Filter drop-down menu.
Step 2. Enter 00:30:4F:00:00:01 in the MAC address box and click “Add”.