PLANET MH-2300 - Manual (Page 239)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
239
Step 9. The IPSec autokey rule is successfully added.
IPSec Autokey Rule Successfully Added
Step 10. Under
Policy Object > VPN > Trunk, click New Entry and then
set as shown below:
„ Name: Specify a name for the VPN Trunk.
„ Local Settings: Select “LAN” for Interface and specify the subnet
and netmask for Company B.
„ Remote Settings: Specify the subnet and netmask of Company
A.
„ Tunnel Selection: Select “VPN_B” from the Available Tunnels
column on the left, and then click Add.
„ Tick the box of “Enable NetBIOS Broadcast over VPN”.
„ Click
OK to complete the settings.
Adding a VPN Trunk