PLANET MH-2300 - Manual (Page 29)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
29
Step 4. Go to Policy > Outgoing and configure the following settings:
„ Click New Entry.
„ Source Address: Specify a name for the outgoing policy, e.g.,
“LAN 1_Subnet1”.
„ Action: Tick the box of “Permit all outgoing connections”.
„ Click
Advanced Settings.
„ Under the IP Redirection section, select “Automatic” for Port 2
(WAN1) and Port3 (WAN2).
„ Click OK.
„ Click New Entry.
„ Source Address: Specify a name for the outgoing policy, e. g.,
“LAN 2_Subnet 2”.
„ Action: Tick the box of “Permit all outgoing connections”.
„ Under
the IP Redirection section, select “Routing” for Port 2
(WAN1) and select “Automatic” for Port 3 (WAN2).
„ Click OK.
Creating a Policy to Apply the First LAN Address Settings