PLANET MH-2300 - Manual (Page 295)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
295
Step 3. Go to Policy Object > VPN > Trunk, click New Entry and then set as
shown below:
„ Specify a name for the VPN Trunk.
„ Local Settings: Select “LAN” for Interface and specify the subnet
and netmask for Company A.
„ Remote Settings : Select Remote Client.
„ Select “PPTP_Server_PPTP_Connection” from the Available
Tunnels column on the left and then click Add.
„ Tick the box of “Enable NetBIOS Broadcast over VPN”.
„ Click
OK to complete the settings.
Creating a Trunk for the VPN Traffic
Policy Successfully Created
The Local Settings from Step 3 must be specified with the LAN subnet of an
IPSec VPN network if the access to it is requested by a PPTP VPN client.