PLANET MH-2300 - Manual (Page 289)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
289
For Company B, set as shown below;
Step 1. Go to Policy Object > VPN > PPTP Client, click New Entry and then
set as shown below:
„ Type in “PPTP_Connection” in the Username field.
„ Type in “123456789” in the Password field.
„ Specify the WAN 1 gateway address of Company A in the Server
IP or Hostname field.
„ Tick the box of “Encryption”.
„ Select “Port2 (WAN1)” for Interface.
„ Tick the box of “NAT with PPTP Client”.
„ Click
OK to complete the settings.
Adding a PPTP Client
PPTP Client Successfully Added
The Internet access via PPTP VPN tunnel requested by a PPTP client needs to
be achieved by ticking the box of “NAT with PPTP client”