PLANET MH-2300 - Manual (Page 70)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
70
Step 2. Go to Network > Interface and then set as shown below:
„ Click Modify corresponding to Port 2.
„ Select “LAN” for Interface Type.
„ Select “NAT Routing” for Connection Type.
„ Specify
the IPv4 Address and the Netmask.
„ Tick the boxes of “Ping/ Tracert”, “HTTP” and “HTTPS”.
„ Click
OK.
Configuring the LAN Interface Settings
Step 3. Go to Network > Interface and then set as shown below:
„ Click Modify corresponding to Port 3.
„ Select “LAN” for Interface Type.
„ Select “Transparent Bridging” for Connection Type.
„ Tick the boxes of “Ping/ Tracert”, “HTTP” and “HTTPS”.
„ Click
OK.
Specifying the Connection Type for the LAN Interface