PLANET MH-2300 - Manual (Page 279)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
279
Step 3. Under Policy Object > VPN > Trunk, click New Entry and then set as
shown below:
„ Specify a name for the VPN trunk.
„ Local Settings: Select “LAN” for Interface and specify the subnet
and netmask of Company A.
„ Remote Settings : Specify the subnet and netmask of Company
B.
„ Select “PPTP_Server_PPTP_01” from the Available Tunnels
column on the left and then click Add.
„ Tick the box of “Enable NetBIOS Broadcast over VPN”.
„ Click
OK to complete the settings.
Adding a VPN Trunk
VPN Trunk Successfully Added
When specifying the Remote IP Address / Netmask for a PPTP VPN trunk, it
merely takes a PPTP VPN tunnel to meet the requirement.