PLANET MH-2300 - Manual (Page 50)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
50
Step 1. Go to Network > Interface and then set as shown below:
„ Click Modify corresponding to Port 2.
„ Select “LAN” for Interface Type.
„ Select “NAT Routing” for Connection Type.
„ Specify
the IPv4 Address and Netmask.
„ Tick the boxes of “Ping/Tracert”, “HTTP” and “HTTPS”.
„ Click
OK.
Modifying the LAN Interface Settings