PLANET MH-2300 - Manual (Page 297)

Gigabit Multi-Homing VPN Security Gateway
MH-2300
297
Step 5. Under Policy > Incoming, click New Entry and then set as shown
below:
„ Select the VPN trunk for VPN Trunk.
„ Click
OK to complete the settings.
Creating a Policy for Allowing Incoming VPN Traffic
Policy Successfully Created
For B Company, set as shown below:
Step 1. Go to Start > Control Panel > Network and Internet > Network and
Sharing Center, and then set as shown below:
„ Select “Set up a new connection or network” under the Change
your networking settings section.
„ In
the Set Up a Connection or Network dialog box:
‹ Select “Connection to a workplace”.
‹ Click
Next.
„ In the Connect to a Workplace dialog box:
‹ Click Use my Internet connection (VPN).
‹ Internet address: Type in “61.11.11.11”.
‹ Destination name: Specify a name.
‹ Tick the box of “Don’t connect now, just set it up so I can
connect later”.
‹ Click Next.
‹ Type in “PPTP_Connection” in the User name field.